Designing Semipermeable Hydrogel Shells with Controlled Thickness through Internal Osmosis in Triple-Emulsion Droplets

Hydrogel shells that compartmentalize the water core from the aqueous surrounding provide molecular selectivity on size and charge in transmembrane transport. It is highly demanding to produce thin hydrogel shells to minimize diffusion length and maximize core volume. Here, internal osmosis in water-in-oil-in-water-in-oil (W/O/W/O) triple-emulsion droplets is used to produce thin hydrogel shells enclosing a large water core. The triple-emulsion droplets are prepared to have an ultrathin middle oil layer using a capillary microfluidic device. The innermost water droplet has a higher osmolarity than the outer water layer containing photopolymerizable hydrogel precursors, which pumps water from the outer layer to the core through the ultrathin oil layer by the osmosis. Therefore, the outer layer gets thinner and hydrogel precursors are enriched while the size of the triple-emulsion droplets remains unchanged. Through photopolymerization of precursors and phase transfer from oil to water, hydrogel shells enclosing water core are produced in the water environment; the oil layer is ruptured for molecular exchange through the shells. The thickness and composition of the hydrogel shells are precisely controllable by the osmotic conditions. The shells show a high permeation rate due to the thinness as well as controlled cut-off threshold of permeation for neutral and charged molecules.     

Precise Molecular Sieving Architectures with Janus Pathways for Both Polar and Nonpolar Molecules

Precise molecular sieving architectures with Janus superhighways are constructed via a molecularly engineered interfacial reaction between cyclodextrin (CD) and trimesoyl chloride (TMC). Interestingly, the CD/TMC nanofilms constructed with both hydrophobic inner cavities and hydrophilic channels exhibit exceptionally high permeances for both polar and nonpolar solvents. The precise molecular sieving functions are determined by the type of CD building blocks and the inner cavities of intrinsic 3D hollow bowls. Positron annihilation spectroscopy (PAS) confirms that a larger inner CD cavity tends to generate a larger free volume and higher microporosity. Based on the rejection ratio of various dyes, the estimated molecular weight cutoff of CD/TMC nanofilms follows the trend of α‐CD/TMC (320 Da) <β‐CD/TMC (400 Da) <γ‐CD/TMC (550 Da), which is in strict accordance with the orders of their free volumes measured by PAS and inner cavity sizes of α‐CD <β‐CD <γ‐CD. This kind of novel CD/TMC molecular sieving membrane with intrinsic microporosity containing tunable pore size and sharp pore‐size distribution can effectively discriminate molecules with different 3D sizes.     

Fabrication and Thermal Dissipation Properties of Carbon Nanofibers Derived from Electrospun Poly(Amic Acid) Carboxylate Salt Nanofibers

Polyimides (PIs) possess excellent mechanical properties, thermal stability, and chemical resistance and can be converted to carbon materials by thermal carbonization. The preparation of carbon nanomaterials by carbonizing PI‐based nanomaterials, however, has been less studied. In this work, the fabrication of PI nanofibers is investigated using electrospinning and their transformation to carbon nanofibers. Poly(amic acid) carboxylate salts (PAASs) solutions are first electrospun to form PAAS nanofibers. After the imidization and carbonization processes, PI and carbon nanofibers can then be obtained, respectively. The Raman spectra reveal that the carbon nanofibers are partially graphitized by the carbonization process. The diameters of the PI nanofibers are observed to be smaller than those of the PAAS nanofibers because of the formation of the more densely packed structures after the imidization processes; the diameters of the carbon nanofibers remain similar to those of the PI nanofibers after the carbonization process. The thermal dissipation behaviors of the PI and carbon nanofibers are also examined. The infrared images indicate that the transfer rates of thermal energy for the carbon nanofibers are higher than those for the PI nanofibers, due to the better thermal conductivity of carbon caused by the covalent sp² bonding between carbon atoms.     

Collective reflection strategy for moderating conformity tendency and promoting reflective judgment performance

Reflective judgement is crucial for medical-related practitioners in dealing with controversial issues. However, the conformity phenomenon is likely to occur and interfere with reflective judgement learning during interactive activities. Effective strategies are required to moderate the conformity behaviour tendency (CBT) and improve reflective judgement performance (RJP). This study demonstrates two significant results: (a) Compared with the guided self-reflection learning strategy, the online collective reflection (OCR) learning strategy effectively weakened the learners' general CBT while dealing with professional controversial issues; and (b) a significantly negative correlation between the RJP achieved and the change of CBT in online environment was detected in the OCR group. The implications and potential applications in higher education were discussed. Further studies are needed to confirm the long-term effects and the extending application to other professional studies.     

Graphite powder coated polyurethane sponge hollow tube as a high-efficiency and cost-effective oil-removal materials for continuous oil collection from water surface

In this study, the cost-effective graphite powder (GPd)-coated polyurethane (PGPd-PU) sponge hollow tube (PGPd-PUHT) was prepared for high-efficient continuous oil removal, the hydrophobicity-superoleophilicity PGPd-PU sponge was fabricated through a simple dip-coating method, which dipping PU sponge into GPd dispersion and drying, then coating polydimethylsiloxane (PDMS) on sponge skeleton, as-prepared sponge could selectively absorb a variety of oils up to 34 times of its own weight for dimethyl sulfoxide (DMSO). The PGPd-PUHT was prepared via wrapping PGPd-PU sponge on porous tubular support. The obtained PGPd-PUHT could continuously collect various types of oils from water surface with flux as high as 1.52 kL/m²h, and excellent separation efficiency (up to 97.7%) for toluene, as well as remarkable reusability. Moreover, a continuous floating oil collection device based on PGPd-PUHT was designed which showed excellent floating oil collection ability. In addition, our strategy possesses the advantages of low cost, simple preparation, highly efficient, and easily scale-up, showing a great potential for dealing with practical oil spill remediation. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48921.     

采用酯类捕收剂PZA提高铜、银回收率的选矿试验研究

在某硫化铜矿浮选过程中,进行了酯类捕收剂PZA与丁基黄药、丁基铵黑药、Z200等对比研究,发现PZA对铜、银具有良好的选择性,与丁基黄药组合效果更佳。原矿铜、银品位分别为0.28%和8.50g/t情况下,采用铜硫混合浮选—铜硫分离工艺流程,最终获得了铜精矿Cu品位21.58%、回收率83.94%,Ag品位500.10g/t、回收率62.99%的技术指标,较好的实现了银在铜精矿的定向富集。     

Porous Si3N4 ceramics prepared by aqueous gelcasting using low–toxicity DMAA system: Regulatable microstructure and properties by monomer content

In this study, the low–toxicity monomer N, N–dimethylacrylamide (DMAA), serving as both gelling agent and pore–forming agent, was adopted to fabricate porous Si₃N₄ ceramics with a regulatable microstructure and property by aqueous gelcasting. Results indicate that monomer content played an important role in regulating and optimizing the properties of sintered bodies. With increasing monomer content (5.94–30.69?wt%), both slurry viscosity (maximum 0.14?Pa?s at 95.40 s^?1) and green body strength (11.35–49.23?MPa) exhibited monotonic increasing trends, demonstrating superior mechanical properties to those obtained using the neurovirulent acrylamide (AM) gelling system. The increased monomer content not only improved porosity, but also promoted α→β–Si₃N₄ transformation as well as β–Si₃N₄ grain growth through enhancing the connectivity of interlocking pores and accelerating the vapor phase transport during liquid–phase sintering. These variations in phase composition and microstructure derived from the varied monomer content further resulted in monotonic changes in porosity (40.32–51.50%), mean pore size (0.27–0.38?μm), flexural strength (202.77–132.15?MPa), fracture toughness (2.93–2.32?MPa?m^1/2), dielectric constant (3.48–2.78) and loss (3.52–3.09?×?10^?3) at 10?GHz for sintered bodies, displaying an excellent comprehensive properties. This study suggests a promising prospect for DMAA in preparation of high–performance porous Si₃N₄ ceramics by aqueous gelcasting.